OZ9800 series is populated by using OZ600, OZ810, OZ816, OZ1603 or OZ106 stand-alone modules in a 1U 19” rack mount chassis. This custom built product is capable of carrying up to 5 Transceivers (TRx). Also you may designate each OZ9800 to carry only Transmitters (Tx) or Receivers (Rx). It has capacity to hold up to 5 Tx or 5 Rx modules. Standard operational frequency ranges between 47 MHz and 3 GHz but it can be extended to range from 10 KHz to 7 GHz.
OZ9800 can be powered using +12 Volts DC or 110-240 Volts AC. Dual redundant power supplies with automatic switching are available for AC powered models. Front panel LED indicators enable a visual check of power supplies and cumulative link status. Alarm conditions are indicated via relay board (dry contact). Standard optical connectors are SC/APC or FC/APC. RF connectors are 50 Ohm SMA.
- Houses up to 5 PCs of OZ600, OZ810, OZ816, OZ1603 or OZ1606 TRx modules
- Houses up to 5Tx or 5Rx of OZ600, OZ810, OZ816, OZ1603 or OZ1606 modules
- 1U, 19 x 15 in. chassis with optional 19 x12 in.
- Front Panel Alarm Indicator
- Dual Universal AC Power Supply
- Dry Contact Alarm outputs per each Tx and Rx.
- 0C to +60C Operating Temperature
- MTTF exceeds 10 years at +50C
- Internal WDM for single fiber functionality
- Multimode Fiber Compatibility
- CWDM wavelength lasers to allow transport of multiple RF channels over single fiber
- 1.25 Gbps Ethernet Data Link
- In‐Building DAS Solutions
- Satcom
- WiMax/4GLTE
- Cellular Backhaul
- MMDS
- Remote Antenna Location
- GPS Signal Distribution
- Timing & Frequency Signal Distribution
