J3U and N+1 Redundancy ..

Home / J3U and N+1 Redundancy ..

 

  J3U Transport and N+1 Redundancy  

Welcome this video is part of our series of videos that are designed to provide an introductory and simple explanation to our product offerings.  For those of you who work for a major US wireless carrier please check our LinkedIn user groups that are dedicated to the specific equipment that is used by your carrier.

In general, we are always here to help both in the design and in explanation.  We are working out one-on-one any which way that we can do to help in making our products user friendly and useful for you on your particular application.  Thank you for your attention and here’s the video.

Hello this is Britt from Optical Zonu.  Today we’re going to give a brief overview of the J3U and the N+1 redundancy option.  In the redundant system that we are showing today we are illustrating with this chassis, we are showing a two plus one redundancy architecture so there are two signal sources, there are two fiber transmitters number one and number two and there is a standby spare fiber transmitter.  Likewise for the receivers there is a receiver 1 and a receiver 2 and a standby spare receiver.  So, to show how this works by example I will just disconnect or force a failure for transmitter number one so the led’s now indicate that this transmitter is being bypassed and traffic is being routed through and over the optics of the spare transmitter if I re-engage the transmitter number one, these errors clear and once again the standby spare is not passing traffic in a similar way receiver one.  Or, for example receiver two may be disengaged so alarms indicate that receiver two is disengaged and now traffic is being passed over the standby spare receiver, if I re-engage receiver number two the error is clear and the spare receiver is returned to a standby mode.

Thank you for watching our video for more information visit our web page at www.OpticalZonu.com