OZ10x – Mini RFoF Link
The OZ10x OEM fiber optic transmitter and receiver modules are broadband RF over Fiber standalone optical links enclosed board level assemblies that are well-suited for low size/weight/power applications. The standard RF band transported is 30 – 3000 MHz. Optional extended bandwidths of 1 MHz (for lower roll-off) and/or 6 GHz (for upper roll-off) are also available. The OZ10x features a linear optically isolated DFB laser diode operating at 1310 nm or 1550 nm or a high performance InGaAs photodiode. The standard RF interface is 50 Ohm SMA. A primary application for the small OZ10x OEM module is to facilitate antenna radiation pattern measurements. The optical modules enable the measurement of radiation patterns of small antennas without the EM interference of coaxial cables.
- Upper Roll-off frequency: 3 GHz, 4 GHz, 6 GHz
- Lower Roll-off frequency: 30 MHz (contact factory for frequencies down to 1 MHz)
- RF Gain/NF: no LNA, +20 dB LNA (in transmitter)
- Transmitter Wavelength (CWDM): 1270 – 1330 nm, 1470 – 1610 nm
- Optical Connector (pigtail): SC/APC, FC/APC, LC/APC (contact factory)
- Fiber: Single mode, 62.5 um OM1 MMF, 50 um OM3/OM4 MMF (contact factory)
- Power source: 5 VDC, 3.7 VDC (contact factory)
- 30 MHz to 3 GHz RF Bandwidth (optional 6 GHz)
- -40°C to +70°C Operating Case Temperature Range (1310 nm)
- Small Size, 0.7” x 1.6” x 0.3”
- Weighs 18.7 Grams
- 1310 nm, 1550 nm, CWDM Wavelengths
- High SFDR
- +5V Supply Voltage
- Automatic Optical Power Control
- Local LED Alarm Indicator
- Uncooled Isolated DFB Lasers
- Lasers Conform to Class 1 Emission Level Per CDRH and IEC-825 (EN 60825) Standards
- Integrated +20 dB Transmitter LNA
- Extended High Frequency, 6 GHz
- Extended Low Frequency, 1 MHz
- +3.7V Power Supply Option
- I2C Status and Control
- Multimode Fiber Capability
- Radiation Pattern Measurements
- High Density Deployments
- In-Building DAS Solutions
- Avionics
- Low Voltage Battery Powered
- 4G LTE
- 5G CBRS
- Optical Delay Line
- Remote Antenna Location
- Satcom