OZ600 – Standard RFoF TRx

Home / Stand Alone Modules / OZ600 – Standard RFoF TRx

OZ600 is a low cost RF over Fiber transceiver. A pair of OZ600 transceivers will create a two-way bidirectional RF to Optical and Optical to RF link. OZ600 can also be configured as individual Transmitter (Tx) or Receiver (Rx) units if necessary. OZ600 is an excellent alternative to using coaxial cable systems and offer significant improvements in the transport of high frequency RF signals in their native format reliably across broad range of frequencies. It has low Noise Figure (NF) and high Spurious Free Dynamic Range (SFDR), with operational frequencies from 47 MHz to 3.0 GHz, or more.

The OZ600 is designed as a compact RF plug and play device that is easily integrated into your existing platform. It has a very low failure rate with an MTTF at room temperature of 20 years. Virtually any analog RF signal which falls within its bandwidth range can be transported over fiber optic cable using the OZ600 modules. Typical applications in which the OZ600 may be utilized include, but are not limited to, IF Satcom Band, L Band, GPS, PCS Cellular, UHF and VHF signal distribution over fiber.

All OZ600 modules are equipped with a Manual Gain Control (MGC) via a potentiometer accessible from the top of the box by a small screw driver (or “twiker”) to ease field integrations. Standard optical connector is SC/APC for low back reflection but FC/APC is also available. OZ600 Rx features a high performance InGaAs photodiode and Tx is based upon a linear Isolated FP Laser operating at 1.3 µm. Average Automatic Power Control (AAPC) is incorporated for optimal optical power stability over the full temperature range. RF interface is via a 50 Ohm SMA connector. Alarm monitoring and power input is via male DB-9 connector and +12 Volts DC is required to operate this device.

FeaturesOptionsApplications
  • Rugged Dust-Tight Packaging
  • Approx Size: 3 x 5 x 1.25 in.
  • Weight: 3/4 lb.
  • 30 MHz to 2.7 GHz Bandwidth
  • Low Noise Figure (NF)
  • High Spurious Free Dynamic Range (SFDR)
  • ‐40C to +75C Operating Temperature
  • Automatic Optical Power Control
  • Manual Gain Adjust (MGA)
  • Built-in Low Noise Amplifier (LNA)
  • Internal WDM for single fiber functionality
  • Extended Bandwidth 10 KHz to 3.3 GHz
  • Multimode Fiber Compatibility
  • Wide DC Input Range of +18 V to +30 V Supply
  • In‐Building DAS Solutions
  • Satcom
  • WiMax/4GLTE
  • Cellular Backhaul
  • MMDS
  • Remote Antenna Location
  • GPS Signal Distribution
  • Timing & Frequency Signal Distribution
WordPress Lightbox Plugin