Fixed (19" Rack)
Home / Products / Form Factor / Fixed (19″ Rack)
OZC9500
- RF Signal Transport 30 MHz to 3 GHz (6 GHz is optional)
- 0°C to 50°C Ambient Operating Temperature Range
- Houses up to 8 “OZ5xx-style” Transmitters and/ or Receivers
- IRIG-B / 1PPS / TTL Signal Transport
- 10 – 200 MHz Low Phase Noise Reference Transport
- 1310 nm, 1550 nm, CWDM Wavelengths (optional integrated CWDM mux/demux)
- Remote Monitoring via SSH, HTML, Embedded GUI Application, SNMP v2 and v3
- Local LED and Dry Contact Alarms
- Dual Universal AC Power Supply
- Multimode Fiber Capability (Single Mode standard)
- MTTF Exceeds 10 Years at 50°C
- 1RU, 19” x 15” Chassi
OZ9800
- 30 MHz to 6.0 GHz Bandwidth
- Houses up to (5) units of OZ600, OZ800, and/or OZ1600 module
- Front Panel Alarm Indicator
- 0°C to +60°C Operating Case Temperature
- Laser diode, photodiode Monitoring and Alarm
- Dual Universal AC Power Supplies
- Dry Contact Alarm outputs per each transmitter and receiver
- 1RU, 19” x 15” Chassi
- Multimode Fiber Capability (Single Mode standard)
- MTTF exceeds 10 years at +50°C
GNSS/GPS Fiber Receiver
- 1 or 2 GPS Channels – 8 or 16 RF Outputs
- Auto‐Switchover (2 Antenna) Redundancy Option
- Point‐to‐Point or Distributed GPS for C‐RAN Hubs & Base Station Hotels
- Patented Antenna Load Propagation
- Simple, Clear Alarming Integrates Easily Into Any NMS
- Supports L1 – L5 Frequencies, GLONASS, GALILEO
- NEBS Level III certification
- Auto-Termination of Unused RF Outputs
- Multimode Fiber Capability (Single Mode standard)
Wireless Infrastructure Synchronization
Data Network Timing
- Public Utilities
eFiberSAT Indoor Chassis
- 30 – 3000 MHz Between Modem and Antenna
- 4 GHz, 6 GHz bandwidths available)
-20°C to +60°C Operating Temperature Range
- 19” 1RU Rack Mounted Indoor Unit
- 1310 nm, 1550 nm, CWDM Wavelengths (integrated CWDM mux/demux)
- High SFDR
- Low Phase Noise Reference Clock Distribution
- Local LEDs and Dry Contact Alarms (Indoor Unit)
- SSH CLI, HTTP Web UI, Managed RFoF Graphical User Interface (GUI) and SNMP v2 and v3 for Remote Monitoring
Satellite Phone (Iridium) Indoor Chassis
- System is Transparent to any Approved Iridium Equipment
- 19” 1RU Chassis Supports Connection of up to Four Phone/Cradles
Support for Direct Connection of Phone Docking Stations to Indoor Unit Over Copper
- Support for Voice and Data Modems
- Fiber Cabling Supports Location of Indoor Equipment up to 1 km Away From Outdoor Line-of-Sight Antennas
- Local LED and Dry Contact Alarms
- Dual Universal AC Power Supply
- Systems Available to Support Globalstar, Inmarsat, and Thuraya Requirements
Ceiling Mount Indoor Termination Supports Re-Radiating Indoor Antennas