Up to 60 GHz Home / Modules / Form Factor / Small Modules OZ18xx Flange Mount Enclosure Bandwidths up to 70 GHz -20°C to +65°C Operating Temperature Stable Fixed Gain and RF Performance Over the Full Operating Temperature Range Configured as Transmitter, Receiver, or Transceiver High Spur Free Dynamic Range (SFDR) CWDM and DWDM Wavelengths +15, +25, +35 dB Integrated LNA in Transmitter +15, +25, +35 dB Integrated Post Amplifier in Receiver I2C serial communication interface View Product Datasheet JDM/JXM Plug-in Bandwidths up to 70 GHz High Spur Free Dynamic Range (SFDR) Stable Fixed Gain and RF Performance Over the Full Operating Temperature Range Remote Monitoring see Managed RFoF  Supports SNMP v2 & v3 and RESTful API Low Noise Transmitter RF Amplifier Options (+15 dB, +25 dB, +35 dB) Receiver RF Post-Amplifier Options (+15 dB, +25 dB, +35 dB) CWDM and DWDM Wavelengths Available View Product Datasheet TS Enclosure IP-68 Rated Outdoor Enclosure Bandwidths up to 70 GHz -20°C to +55°C Operating Temperature Stable Fixed Gain and RF Performance Over the Full Operating Temperature Range Configured as Transmitter, Receiver, or Transceiver High Spur Free Dynamic Range (SFDR) CWDM and DWDM Wavelengths Remote Monitoring and Control see Managed RFoF  Supports SNMP v2

Micro-OTDR Technology Home / Modules / Small Modules / OZ200 What is SPECIAL about the Micro-OTDR™? Fast Fiber Fault Finder™ Standard SFP / SFP+ format fits in any networking equipment. When link breaks – distance to fault is availabl. Features Benefits The configuration is standard: SFP/SFP+ (Small Form-Factor Pluggable). When the fiber is cut, disconnected or broken the distance to the break point is instantly reported Data rates are FE, OC3, GbE, OC48, and 10G Immediate plug-in replacement of an existing SFP/SFP+ Automatically generates Link “Birth Certificate” Fast Response Time. Supports Interactive Mapping Capability. OpEx Reduction. Reduced Network Down-Time. Datasheet Contact Us Overview: Standard SFP (MSA Form Factor) links automatically (like any SFP) with a counterpart at the other end of the optical fiber link Upon detecting a link “break”, or fault, the unit transforms into a Micro-OTDR™ For the single fiber version – patented single wavelength duplex CWDM transport High optical power pulses are sent and sensitive circuitry measures all reflections detected Internal processing eliminates false detection, and ensures reliable measurement of more than 10 reflection points (e.g. bad splice, micro crack, dirty connectors, etc.) All results are available, via IIC bus of the SFP, to the host Switch

SFP / SFP+ Transceivers Home / Modules / Small Modules / OZ200 Benefits Fiber optic data transport device – in an industry standard format (multi-source agreement – MSA – defined shape and functionality) The format is standard SFP/SFP+ (Small Form Pluggable).​Data rates are FE, OC3, GbE, OC48, and 10G Immediate plug-in replacement for an existing SFP When the fiber is cut, disconnected or broken, the distance to the break point is instantly detected, located, and reported View Product Datasheet Overview: Based upon unique technology developed and patented by OZC. Fiber optic data transport device –in an industry standard format (multi-source agreement – MSA – defined shape and functionality). Product Category • Single-Fiber GbE SFP – SC – LC​  • Dual-Fiber Fiber GbE SFP​• Dual-Fiber 10GBASE-LR SFP+ Model Example • AF6-131F1-LU​• AF6-D51FZ-LU​• AF6-D31XL-LU

Single Fiber Home / Modules / Small Modules / OZ200 Features Benefits The iSFC® Configuration is the one to choose for CWDM access Networks and Wireless Front Haul, where its advantages, compared to the conventional Dual-Fiber Configuration, of using only Half the Optical Fibers, Half the Optical Passives and Half the Optical Connectors, all come into play The full range of the ITU CWDM Grid is supported, plus 1625 nm for monitoring purposes. With 1625, you can monitor a fully utilized CWDM optical fiber link without the need to “waste” one of the data channels Our exclusive RIO® feature allows these SFPs to be used in any optical network, without the limitation of legacy SFSW SFPs, which suffer from optical loopback caused by reflections of their own transmitted signals Single-Fiber, Single Wavelength, Full Duplex, CWDM – iSFC®​ Fast Ethernet, Gigabit Ethernet, CPRI​ 60 dB DR or 55 dB DR for Micro-OTDR​ SC/UPC and LC/UPC Datasheet Contact Us Overview: The iSFC® Configuration is the one to choose for CWDM access Networks and Wireless Front Haul, where its advantages, compared to the conventional Dual-Fiber Configuration, of using only Half the Optical Fibers, Half the Optical Passives and Half the Optical Connectors, all

Dual-Fiber Home / Modules / Small Modules / OZ200 Features Benefits The iDFC™ Configuration is the one to choose for the Optical Supervisory Channel (OSC) applications where conventional Dual-Fiber SFPs are widely deployed A drop-in replacement for existing SFPs, with the Micro-OTDR™ added to monitor the high speed, high revenue, DWDM trunks, which require the OSC function For Wireless Back-Haul, Front-Haul and Core Network Applications, substituting the Micro-OTDR™ SFPs for the existing legacy units, adds an additional physical layer monitoring capability previously unavailable to these numerous, critical optical network links Dual-Fibre, Conventional CWDM – iDFC™​ Fast Ethernet, Gigabit Ethernet, 10 G Ethernet, CPRI​ 65 dB DR for Micro-ODTR™ Duplex LC/UPC Datasheet Contact Us

Use-Cases Home / Modules / Small Modules / OZ200 Overview Available in the industry standard configurations, the Micro-OTDR™ feature can be deployed in a wide variety of network applications. Features Communications Services Providers (CSPs) and Internet Service Providers (ISPs) • Configurations: • Single-Fiber, CWDM • SC/UPC or LC/UPC optical receptacle​• Ideal for Access Network – Business Class​• Advantage of the “Halves”: Half the optical fiber;​• Half the optical connectors;​• Half the optical splices;​• Half the optical passives;​• Half the failure rate (FIT) • Dual-Fiber, CWDM• Duplex LC/UPC optical receptacles​• Standard SFP and SFP+​• GbE 80 Km Reach Class Power Utilities – Dual-Fiber, Industry Standard, SFP and SFP+ Configurations• Automatic or Full-Time monitoring of optical fiber and copper cable plants • Drop-In replacement for standard transceivers • Copper-theft deterrent Security – Single-Fiber, CWDM, SFP Configurations• Firmware (FW) optimization for specific security deployments• Factory programmable for custom setup• Automatic or full-time Micro-OTDR™ operation Optical Supervisory Channel (OSC) – Dual-Fiber, Industry Standard, SFP Configuration• Drop-in replacement for standard OSC SFPs • Add Micro-OTDR™ feature with minimum Engineering support• FE (OC3; STM1) Signal Rates• 100 Km Reach Class  Raman Optical Fiber Amplifiers – Dual-Fiber, Industry Standard, SFP Configuration • Dual-Fiber, Industry Standard, SFP Configuration • 100 Km Reach Class • Test optical fiber link before amplifier power-up 10G BASE-LR CWDM Example: Digital Product Family:  Datasheet Contact Us

Digital Transport Home / Modules / Small Modules / OZ200 What is SPECIAL about the Micro-OTDR™ SFP Transceiver  – μOTDR™  – Fast Fiber Fault Finder™?  Features Benefits The configuration is standard: SFP/SFP+ (Small Form-Factor Pluggable). When the fiber is cut, disconnected or broken the distance to the break point is instantly reported. • Data rates are FE, OC3, GbE, OC48, and 10G.​• Immediate plug-in replacement of an existing SFP/SFP+.​• Automatically generates Link “Birth Certificate”. • Fast Response Time​• Supports Interactive Mapping Capability​• OpEx Reduction​• Reduced Network Down-Time Overview Benefits Standard SFP (MSA Form Factor) links automatically (like any SFP) with a counterpart at the other end of the optical fiber link. ∙Upon detecting a link “break”, or fault, the unit transforms into a Micro-OTDR™. ∙High optical power pulses are sent and sensitive circuitry measures all of reflections detected. ∙Internal processing eliminates false detection, and ensures reliable measurement of more than 10 reflection points (e.g. bad splice, micro crack, dirty connectors, etc.) ∙All results are available, via IIC bus of the SFP, to the host Switch ∙Our S11 Switch enables retention of the optical fiber link “birth certificate” (the initial measurement of the link distance, and any reflections) and SNMP creates “traps” of any change in the optical fiber link status. ∙A special

Evaluation Kit Home / Modules / Small Modules / OZ200 Quick Start Kit – QSK For Customers Initial Evaluation Testing – ready to test “out-of-the-box”. Test optical fiber data link and Micro-OTDR™ feature – minimum of two (2) Micro-OTDR™ SFP transceivers required. GbE SFP Overview Benefits Evaluation Kit is great for Customers Initial Evaluation Testing – ready to test “out-of-the-box”. • Test optical fiber data link and Micro-OTDR™ feature​• Media Converter​• Deployment-Ready​• Full Management GUI (NMS is available) Media Converter AS2-S11-S-GE-5​Deployment-Ready​Full Management GUI​ QSK Ordering Information Evaluate Micro-OTDR™ and Data Link – Please contact us for pricing and availability. Two (2) Micro-OTDR™ SFP Transceivers:​Single-Fiber Option => AF6-155G1-LU. Two (2) Media Converters:​Deployment-Ready => AS2-S11-S-GE-5.

Digital White Papers Home / Modules / Small Modules / OZ200 Overview Read the following Technical and Economics White Papers to gain a better understanding of the Benefits of monitoring your network with our Micro-OTDR™ SFP Transceivers, and to see how our OEM and End-User Customers are deploying these products to both their economic and technical advantage. Technical or Economics Papers Localized Monitoring and Reporting of Your Fiber Optic Network StatusWhite paper by DPS Telecom™ on the subjects of Remote Monitoring & Control. Gigabit SFP Transceiver with Integrated Optical Time Domain Reflectometer for Ethernet Access Services By BT Research & Innovation (Neil Parkin & Derek Nesset) and Optical Zonu (Meir Bartur & David Jenkins) Automatic Detection of Optical “Faults” in Communications Networks: An Efficient, Fast, Physical Layer Monitoring Approach for Access Networks By Meir Bartur (Optical Zonu Corp.) Single fiber single wavelength gigabit transceiversWhite paper by Meir Bartur (Optical Zonu Corp.)  From Our Blog Microwave Product Digest Taps OZC CEO for “View from the Top” All Posts Past Tradeshows Las Vegas MWC August 15, 2025/No Comments Join Optical Zonu at Booth #1751 March 10 – 13 for Satellite 2025 taking place at the Walter E. Washington… Read More Hello world!

RFoF Fundamentals​ Home / Modules / Small Modules / OZ200 RFoF Fundamentals​